ARTICLE CATEGORY

Industrial Water Reuse Guides

Resources for planning industrial recovery and reuse routes around wastewater characteristics, recovery and downstream water requirements.

ARTICLES

Water Reuse articles.

BHP industrial MVR wastewater evaporator

Water ReuseOctober 16, 20268 min read

MVR Evaporator Condensate Reuse: Carryover Control, Sampling and Polishing Scope

MVR evaporation can be part of an industrial wastewater recovery route, but collected condensate still needs a defined quality and reuse boundary. A low-conductivity reading alone does not establish suitability for the intended process. Specify how condensate is separated, sampled, assessed, polished where necessary and released under representative feed and operating conditions.

Read Article

BHP industrial wastewater treatment equipment

Water ReuseOctober 16, 20268 min read

Coalescing Oil-Water Separators for Industrial Wastewater: Feed Suitability and RFQ Boundaries

A coalescing oil-water separator can be considered for a suitable free-oil wastewater stream, but the equipment name does not establish suitability for every oily effluent. Procurement should begin with the oil state, water chemistry, solids and hydraulic profile. Representative testing and a clear separation boundary are more useful than an unsupported universal outlet concentration.

Read Article

Industrial water-treatment equipment layout viewed from above during assembly

Water ReuseOctober 15, 20268 min read

Dissolved Air Flotation for Industrial Wastewater: Treatability Trials and Package Specification

A dissolved air flotation package should be selected from wastewater behaviour and a complete separation duty. A catalogue flow rating does not establish whether industrial solids, oils or emulsions will form a removable float. Use representative trials, clear loading cases and defined sludge interfaces to make DAF quotations technically comparable.

Read Article

BHP at China Power Battery Recycling Industry Conference 2026

Water ReuseOctober 15, 20266 min read

BHP Participates in China Power Battery Recycling Industry Conference 2026

BHP Water Treatment took part in the 2026 China Power Battery Recycling Industry Conference in Ganzhou, Jiangxi Province, China, on 15-16 October 2026 and joined the new member unit plaque presentation of the Battery Recycling Committee of the China Electronic Energy Saving Technology Association.

Read Article

Industrial water reuse treatment equipment with membranes, vessels and process piping

Water ReuseOctober 10, 20269 min read

Equalization Tanks for Industrial Water Reuse: Capacity, Mixing and Diversion

An equalization tank for industrial water reuse should be sized and controlled from measured production discharge patterns and the downstream treatment envelope. Flow buffering, load averaging and upset containment are related but different duties. Define compatible source streams, working volume, mixing, instrumentation and a separate diversion route before selecting the tank and transfer equipment.

Read Article

Water ReuseOctober 9, 20269 min read

Industrial Water Reuse System Design: From Source Stream to Reuse Point

A reliable industrial water reuse system begins by separating streams, understanding their variation and defining the next use of recovered water. The process route should be selected from those facts, not from a generic recovery claim or a single technology label.

Read Article