Resources for planning industrial recovery and reuse routes around wastewater characteristics, recovery and downstream water requirements.
Water ReuseOctober 22, 20268 min readA blower package should satisfy the biological oxygen requirement through the actual diffuser and basin system over its operating range. Nominal air capacity is insufficient without a common air reference, pressure envelope, minimum mixing requirement and a workable duty-and-standby control sequence.
Read ArticleWater ReuseOctober 22, 20268 min readIndustrial sludge decanter selection requires a common trial basis for cake, liquid clarity and loading. Bowl speed, scroll differential speed and torque interact with feed variation, so the enquiry should cover operating control and the returned centrate as carefully as the discharged cake.
Read ArticleWater ReuseOctober 22, 20268 min readA rotary drum screen should be purchased against the debris and hydraulic conditions it will actually encounter. Aperture geometry, available head, cleaning utilities and the route for retained screenings determine whether the package protects downstream industrial wastewater equipment.
Read Article
Water ReuseOctober 22, 20266 min readA customer from Kenya visited the Jiangsu branch of BHP Water Treatment to review MVR evaporator technology for water treatment projects. The session covered the MVR evaporation and concentration system design scheme, the equipment specification table and open technical discussion with the BHP engineering team.
Read ArticleWater ReuseOctober 21, 20268 min readA polymer preparation package must deliver usable flocculant solution when the downstream process needs it. Matching a tank volume to a dosing flow is insufficient unless wetting, maturation, solution age and the chosen polymer grade are also defined.
Read ArticleWater ReuseOctober 21, 20268 min readAn industrial sludge screw press enquiry should connect feed variability, floc conditioning and the destination of both cake and filtrate. A wet-volume capacity alone cannot establish the solids-processing duty or the usefulness of the resulting dewatered material.
Read Article
Water ReuseOctober 21, 20268 min readA hydrocyclone or centrifugal separator should be selected from particle behaviour and a defined hydraulic range. It can be a useful grit-removal stage, but a nominal connection size or a clear-water test cannot establish performance on mixed industrial solids.
Read ArticleWater ReuseOctober 21, 20268 min readAutomatic disc filtration is a procurement decision about retained solids, available cleaning energy and usable outlet flow. A micron label alone does not establish whether a filter battery will remain operable on a variable industrial reuse stream.
Read Article
Water ReuseOctober 21, 20268 min readCooling tower side-stream filtration targets a circulating solids inventory. Its value depends on how water and particles reach the filter, how the selected mechanism handles those particles and where the separated solids leave the cooling-water system.
Read ArticleWater ReuseOctober 21, 20268 min readChemical phosphorus removal should be evaluated as a reaction followed by a solids-separation duty. Industrial wastewater composition, phosphorus form and the analytical reporting basis determine what a treatability test demonstrates and what additional treatment remains necessary.
Read ArticleWater ReuseOctober 21, 20268 min readHigh COD alone does not establish whether anaerobic treatment is suitable for an industrial wastewater. Procurement should connect biodegradability and inhibition evidence with biomass retention, startup planning, downstream polishing and an engineered biogas destination.
Read ArticleWater ReuseOctober 20, 20268 min readAdding moving biofilm carriers to an industrial wastewater tank is a process retrofit with hydraulic, aeration and solids interfaces. Evaluate the biological duty and the existing structure before purchasing media volume or treating a carrier surface-area figure as guaranteed capacity.
Read Article